Did you know that your camera has a temperature range for optimal performance?Depending on the model and the manufacturer it is usually between 0o and 40o C.Does it happen that outside these temperatures it doesn’t work? It will work, but don’t expect it to do normally, and you might encounter other problems more serious than a slow shot.
If you are concerned about the maintenance of your equipment, I would stay with you;), because I will tell you how to avoid these possible problems or how to fix them if you want to capture the wonders offered on cold days.
- It may not work normally at very low temperatures.
- The LCD does not work or does not work properly and you need to heat it.
- This does not mean that you place it on a radiator.
- But it does mean that it can enter a closed area where the temperature is higher.
- But the problems that will be most encountered are related to battery and condensation.
Cold batteries give much less, you’ll notice that they have less autonomy and also take longer to recharge. The best solution is the most basic, it carries a spare, so as not to stay in the frame at the best time.. Another tip is, when you’re not wearing it, wear it attached to the body or, for example, in the coat pocket (if it’s inside, better).Your own heat will protect you from the cold and last longer.Put it on the camera when you are going to use it, meanwhile, very close to you;).
When the replacement runs out, if you have had the foresight to stick to your body, try again, as this will probably allow you to take some extra photos, is that the cold leaves them lethargic, but with the heat, it brings them back to life.
If you’re wearing glasses, you probably know what it’s like to enter a very hot place from the street when it’s very cold and the windows are jammed.This is the least that can happen to your camera (or rather your lens) with a sudden change in temperature And I say the minimum because this problem is temporary, you won’t be able to take pictures for a while.
But what if your camera started sweating? It wouldn’t be so literally, but it might seem like it.And this happens when the humidity in the environment condenses into the chamber.While this can be very scary, no matter if condensation is external, however, internal condensation can damage your camera.And I mean really spoil. Fortunately, it’s not very common, but I’ll tell you because it can happen and there are ways to prevent it.
It’s not that your camera hibernating in winter like a bear in the cave, but that you take the necessary precautions.
Some of these measures are
The important thing is that the temperature change is not very abrupt, so any solution that you can think of so that the change is gradual (and not aggressive for the team) will be welcome. When you get home, try not to take it out of your backpack for a few hours. Even if you have to fight the excitement of reviewing photos, you’d better wait with something hot;).
In addition to condensation and battery operation, you should be mindful that at temperatures below or equal to -20 degrees Celsius, metal and some plastics become more brittle, so if hit hard they can crack.In order not to hit the equipment or fall, extreme precautions must be taken in extreme cold conditions.
If you plan to photograph with snow, try using a waterproof case or bag to prevent the camera from getting wet and damage going beyond frozen feet, as these ice vessels eventually turn into water, your team’s number one enemy.
It’s also not a bad idea to use a waterproof backpack or at least a waterproof cover to cover it, if you don’t run the risk of falling into the water with the included equipment, the one that includes a blanket will do the trick.it’s this one.
Tip: You can even wear a shower cap to protect the camera or any plastic bag with the help of a rubber band.
You can’t miss the opportunity to photograph the fog for fear of spoiling your equipment, it’s too magical for that and your team can protect yourself with a bag like snow or wrapped in a T-shirt or fabric, it’s also a good idea to dry it from time to time to protect it from so much moisture.
Okay, you couldn’t wait, the thrill of uploading the photos or revisiting the cool one that did oversteer you and you took the camera out of your backpack as soon as you walked in the door and felt at home, in the heat of Now your camera is almost leaking and you’ve noticed this condensation you can’t remember and you don’t know what to do.First of all, don’t run down the street to cool it down again!! Now breathe, as you get dark, you’re not going to walk on the ball, and follow these steps:
And just so you can see that I don’t want to deprive you of the urge to make your team walk in the cold, I leave you some motivating and inspiring items Can’t you avoid being out of action at the slightest opportunity?
Okay, a lot to protect the computer, but what’s your problem?Have you ever thought about how your hands can stay after five minutes at temperatures below 0 degrees Celsius?I’d wear good gloves for you that allow you to leave some fingers free, because if you have to take them off and put them on, there’s no need to wear them.Here are some in case you don’t know what I’m talking about.
You also have this cheaper option that leaves all your fingers in the air.
Remember that with a very intense cold, the metal adheres to the skin and when removed you can see the stars, hence the importance of gloves and care when bringing a metal chamber closer to the nose or cheekbones.
A good coat, a hat and a termite with a hot drink won’t hurt either.Your team is important, but you’re more. No photographer, no picture?
Don’t forget to share this information to keep your teammates’ cameras safe?Now go out and enjoy the cold, it will be worth it when you see the result!
Thanks and I’ll see you soon.