To have a high standard of quality in a photo, it is necessary to pay special attention to each of the factors that influence its capture Light, landscape, focus, possible tremor or dirt on the lens?Everything directly improves or impairs the final concept that photography will pass.
Amateurs, beginners, aspiring or career professionals, everyone knows that to record a perfect image you have to make sure that nothing disturbs the digital camera “click”, and for this you have to take many precautions beforehand.
- One of the most common precautions that photographers take is precisely to avoid camera pulls during rehearsals.
- Since they decrease the value of the image.
- Making it often obsolete.
There are some tricks and techniques to get stable photos without the terrible camera movement. The main ones are listed below.
It is common for the difficulty of obtaining stable photos to be greater in situations where the light is lower and when the camera is equipped with lenses for the superteleobjetive, this is due to the shutter, which ends up running slowly in these situations.
To ensure the visual quality of your image, it is necessary to maintain a high shutter speed, so that the flicker does not sit on the recorded photos, because the vibration of the camera does not influence its capture as much.
It is important to note that the best technique to use to be sure of the quality of the photos taken, under the conditions mentioned, follows this rule: The shutter speed should always be equal to the inverse of the focal length.
In other words, when the photographer chooses to use a super 300mm telephoto lens, he/she must set the shutter speed to 1/300 s to capture images without moving the camera.
If possible, it is possible to use a speed higher than the rule, as it is valid as a minimum acceptable to maintain the quality standard. The faster the shutter speed, the greater the sharpness and perfection of the photo.
Everything goes in search of the best image and often the ideal is not to touch the camera when shooting!
Strange as it may seem, because when we think of photos and photographers we relate the image directly to the people who usually use their cameras, one of the ways to get stable photos is precisely through that your hands don’t shake. . interferes with professional work.
There are several types of deported blinds, the most well-known and used: Timer, Cable and Infrared.
The remote trigger is the most used and reaches the amateur audience, as it is present in all kinds of cameras, from mobile phones to DSLR cameras. With a simple operation, you only have to choose a space of time for the photo to be automatically recorded, this is one of the ways to photograph with improvised media.
Cables, on the other hand, are connections that allow the professional to maintain a certain distance from the camera at the time of the “click”. They are extremely useful in sequential photos, they also help when the focus does not change and the photographer can be more comfortable.
Infrared devices are simple and function as a remote control that activates the camera shutter, without the need for wires or cables, its only major drawback is that due to the signals emitted, the device may be subject to interference from the environment, affecting the professional. and the work to be done.
The use of a tripod or monopod is quite common in the photographic environment, as it is one of the most useful investments in the life of a professional in the field, its use and handling are very simple to explain and the results obtained with this equipment. are easily noticed at work.
The use of a tripod or monopod is highly recommended in cases where the shutter has a slow speed to capture images.
It provides the necessary support for objects, which are still, to photograph without the tremors caused by our hands, which, although almost imperceptible to us, are extremely visible in the recording of images through powerful cameras and lenses.
Wildlife photographers, for example, who always use telephoto objatives in their work, constantly use this equipment, which is very convenient.
In addition to the tripod, there is the monopod, a lighter-than-normal type of stand that facilitates fast movements and guarantees the same result: A photo without the terrible movement of the camera.
In cases where it is not possible to use the tripod, to take photos without moving the camera, the advice is to use the image stabilizer. The good news is that most of the most modern cameras now offer this option for photo capture.
For example, Canon-branded cameras, which offer this important tool, mention that models with this feature have the acronym IS as an integral part of the name.
The image stabilizer is recommended for photos where manual camera handling can interfere with quality, which can cause image tremors, but it can also be a function used with the tripod.
Most Canon lenses, which already include a stabilizer, automatically recognize the use of a tripod, adjusting the operation based on the movements experienced by the camera.
Warning: It is important to read the entire camera manual at the time of purchase to better understand the possibilities of using your camera.
A higher ISO helps the photographer when it is not possible to freely choose the speed to follow by the shutter or when it is not possible to use a medium to ensure the focus and sharpness of the image.
It is important to remember that all new Canon EOS camera models have a high ISO, which ensures greater security at the time of the “click”, and although it is not possible to use the tripod in certain situations, thanks to the use of this tool, this allows to obtain stable and well finished photos.
Reducing the risk of the camera moving is due to compensation between the ISO tool and the shutter speed.
It’s a very simple logic of understanding. For example, for photos taken with a 200 mm superphoto lens, you need to adjust a higher ISO so that images do not look blurry. Stable photos can be obtained with AN ISO of 800, at a shutter speed set to 1/250s.
The formula shown ensures that camera shake is eliminated from recorded images.
Do you have questions or would like to share your tips and experiences on the topic?Leave us a comment!